This is a problem with Quid Pro Quo's setup. On version +2.1.2 (and others?) you can fix it by doing the following. Control->Services Double click on your configuration. Select "Default Files" on the left. In the list on the right, make sure that the name of your default file is listed. If not, add it. It could also be that you need to set up the "Root Folders". You should only have one entry, with the correct path to you're web pages. Specifically, the error means that a file called "index.html" was not found in the Root Folder QPQ was set up to serve files from. ----- Original Message ----- From: "Richard Smith" <richard@team-artonomy.com> To: "Mac Perl" <macPerl-webcgi@macperl.org> Sent: Friday, March 03, 2000 6:51 PM Subject: Re: [MacPerl-WebCGI] A little off-topic Mac/Windoze query > Hi Eric, > > Thank you for your help. The connection is now working, though I still have > a few bugs to iron out: > > If using Quid Pro Quo as the server, I get a 'file not found' message back > from the server each time I try to request a file, and the server log shows > the following message: > > 03/03/100 23:39:46 ERR! 10.0.0.11 http://10.0.0.10/index.html > 195 Mozilla/4.0 (compatible; MSIE 5.0; Windows 98; DigExt) GET > 3 10.0.0.10 404 Configuration > > where 10.0.0.10 is my Mac and server, and 10.0.0.11 is the PC. Do you have > any idea what the problem is here? I assume IE on the PC is making the > request in a format that Quid Pro Quo is not configured to respond to. > > The alternative: If I use Personal Web Sharing as the server, it works fine, > with the exception that I cannot work out how to get PWS to include the > SSI's which inhabit almost every page on my site. Does anyone know how to > configure PWS to recognise SSI's? > > Once again, any help would be much appreciated, so I can get back to > actually writing CGI's instead of tinkering with Windoze. =) > > Many thanks, > > Richard > > -- > > Richard Smith > Artist/ Illustrator/ Site Designer > Team Artonomy > Visit us at http://www.team-artonomy.com > Visit my online portfolio at http://www.team-artonomy.freeserve.co.uk > richard@team-artonomy.com, ICQ #29343811 > > > > > From: Eric Dobbs <dobbs@dobbse.net> > > Reply-To: Eric Dobbs <dobbs@dobbse.net> > > Date: Friday, March 3, 2000 10:49 pm > > To: Mac Perl <macPerl-webcgi@macperl.org> > > Subject: Re: [MacPerl-WebCGI] A little off-topic Mac/Windoze query > > > > At 10:13 PM +0000 3/3/2000, Richard Smith wrote: > >> I am running Quid Pro Quo on my Mac for local testing of site CGI's, and it > >> works extremely well. I have just acquired a PC (no booing at the back > >> please), and have managed to connect it via an Ethernet crossover and can > >> successfully share files via AppleTalk using MacLan on the PC. > >> > >> However, I have been unable to configure the opaque Windoze network settings > >> so that I can access Quid Pro Quo from the PC. It would be invaluable if I > >> could get this to work so that I can see exactly how my sites will appear on > >> the PC (for some reason, more people use the darn things). > > > > > > The computers are connected to each other via > > a crossover cable. Both need to have their > > network settings configured. > > > > The settings that matter are the ip address and > > the subnet mask. > > > > For example: > > > > Mac: > > ip 10.0.0.1 > > mask 255.255.255.0 > > > > PC: > > ip 10.0.0.2 > > mask 255.255.255.0 > > > > > > On the mac, as I'm sure you know, the settings > > are in the TCP/IP control panel. > > > > Assuming you've got Win95 or newer... > > Start -> Settings -> Control Panel -> > > Network > > > > In the network control panel you should see a > > window pane containing "network components" > > One of those items should be TCP/IP for an > > Ethernet adaptor. If you don't see that, then > > this is probably your problem. For now I'll > > assume you do have one. > > > > Double-click the TCP/IP for the Ethernet adaptor. > > There's an IP address tab in which you can > > configure the IP address and subnet mask as I > > outlined above. After you click okay through > > those items, you'll have to restart the computer. > > But at that point you should be able to point a > > browser on the PC to 10.0.0.1 (the mac) and see > > how things look. > > > > > > > > Now if you don't have that TCP/IP thing, you need > > to add it. > > > > Add... -> > > Select Protocol > > click Add... -> > > Select Microsoft TCP/IP -> > > click Okay. > > > > You may be prompted to provide the Windows CD or > > some such. You'll probably be prompted to restart > > the computer. At this point I would NOT reboot > > just yet. Instead I would go back to the steps I > > described above and configure the IP before > > restarting. Then restart and things should work. > > > > Good luck > > -Eric > > > ==== Want to unsubscribe from this list? > ==== Send mail with body "unsubscribe" to macperl-webcgi-request@macperl.org > ==== Want to unsubscribe from this list? ==== Send mail with body "unsubscribe" to macperl-webcgi-request@macperl.org